Hewlett Packard EML E-Series

Certified Device Drivers

Installation of the following certified device driver combination is described below.

Device Driver    Manufacturer   
LTO drive(s) HP
Medium Changer      XenData

 

Device Driver Installation for XenData Server Software

Installation Prerequisites  XenData Hardware

Ensure that the tape hardware is connected to the server. For SAS connections you must have point to point connections, for Fibre channel you can connect via a switch, however our recommendation is also point to point. The tape hardware must be powered on and in a ready state.

Tape Drive Drivers  XenData Hardware

Download the zipped device driver installation files from the link below to a folder on the C: drive of the Server.

Note: This will download driver version 1.0.7.1. Do not use 1.0.7.2 as we have found issues with that version.

» For LTO 4/5/6 drives download cp020353.exe

Now double click on the downloaded file to launch the HP Storage Tape Drives for Windows utility, click 'Extract' and select a location on the C: drive for the extracted files.

Launch Windows Device Manager and install the LTO tape drive device driver for the first drive as described below.

  • Right-click on 'My Computer' and select 'Manage'.

  • Select Device Manager from the left pane and find the LTO drive; it will be in 'Other Devices' or 'Tape drives' in the right pane.

  • Right click on the device and select 'Update Driver Software...'

  • Select 'Browse my computer for driver software' and browse to the location of the extracted files. Then select the 'W2K8R2-x64' folder and click 'OK'. Then enable 'Include sub-folders' and click 'Next'.

  • A message will be displayed 'Windows has successfully installed your driver software'. Then click 'Close'.

Repeat this process for each drive.

Library Drivers  XenData Hardware

Windows Server 2008 R2 and Server 2012 R2 use digitally signed drivers, so the XenData library driver will be automatically used when the hardware is attached.

Supported Tape Formats  XenData Hardware

The following drive/media combinations are supported by the software with HP LTO-4, LTO-5 and LTO-6 drives:

  Media                
Drive Ultrium 2 R/W Ultrium 3 R/W Ultrium 3 WORM Ultrium 4 R/W Ultrium 4 WORM Ultrium 5 R/W Ultrium 5 WORM Ultrium 6 R/W Ultrium 6 WORM
  200 GB 400 GB 400 GB 800 GB 800 GB 1500 GB 1500 GB 2500 GB 2500 GB
LTO-4 X X X X X
LTO-5 X read only read only X X
LTO-6 X X X read only read only